Celtic knot wedding band
This Celtic knot wedding band is done in a thick 14kt gold with a very slight 'taper' in at the sides and tapers front to back 5mm to 4mm. The thickness is nearly 2mm. The Celtic knots at the front serve as the joining of two Irish love knots.
This is a simple and understated Celtic wedding band.
There is one single size 6.5 in 14kt yellow gold weighing 5.8gms. It can be sized up or down by your local jeweler. Close out price $295.00
#WS915 - $295.00
Double trinity knot Irish love knot wedding rings
These are highly refined and polished Irish love knots or double trinity knot wedding bands. Each is made to order and not stocked or taken off a shelf. Allow 2-4 weeks for yours to be made and please have your size taken accurately. Re-sizing will cost $50-60.
White gold is being done to a minimum of .585 14kt nickle free and rhodium free. It is highly polished and has no need for rhodium plating. For stores, this is done in Stuller's X-1 white casting grain to Birmingham's Assay specs. It will always look as white as it does now. This is a very expensive process and the reason white gold will cost so much more than yellow natural gold.
The rings shown are a mans size 10.5 and weighs 8.3gms
The ladies is a size 6.5 and weighs 5.1gms
Gents ring is 7mm wide at the front and the ladies is 6mm wide
Gents ring is 6mm along the sides and the ladies is 5mm
In the back the gents tapers down to 5mm and the ladies 4mm. Also note the shoulds and back side of the ring is solid. Nothing has been hollowed out. The inside has a mirror polish as nice as the outside. The inside of the knot opening has been polished and has no rough edges or casting details left unfinished.
The thickness of the ring is 1.5mm tapering to 1mm at the very rear.
Gents $495.00
Ladies $345.00
White gold will add $50-75 to the ring.
#DTKILK
- Back to Celtic
wedding bands
- Back to the Irish Celtic jewelry index
